Copyright 2003 and 2005 by The American Institute of Architects (AIA)
Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA
SECTION 052100 - STEEL JOIST FRAMING
Coordinate the following requirements specified in other Sections of this Project's Specifications with this Section. Expand this list for office and consultant coordination. Copy and mark this list to distribute to appropriate design team members for Project Manual coordination.
References on this Specification Coordination Checklist are to MasterSpec Section numbers and titles existing at the time this Section was updated. Refer to the current Consolidated Table of Contents because Section numbers and titles may have changed.
- SECTION 033000 - CAST-IN-PLACE CONCRETE for installing bearing plates in concrete.
- SECTION 042000 - UNIT MASONRY for installing bearing plates in unit masonry.
- SECTION 051200 - STRUCTURAL STEEL FRAMING for joist support framing.
- SECTION 053100 - STEEL DECKING for requirements for fastening decks to joists.
- SECTION 055000 - METAL FABRICATIONS for furnishing steel bearing plates and miscellaneous steel framing used with joists.
- SECTION 061000 - ROUGH CARPENTRY for requirements for fastening wood blocking and floor and roof sheathing to steel joists.
- SECTION 061053 - MISCELLANEOUS ROUGH CARPENTRY for requirements for fastening wood blocking and floor and roof sheathing to joists.
- Division 07 roofing Sections for roof-slope requirements.
- SECTION 072100 - THERMAL INSULATION for insulating end-bearing pockets in concrete and masonry.
- SECTION 074113 - METAL ROOF PANELS for attachment of nonstructural metal roof panels to joists and their contribution, if any, to lateral stability of joists.
- SECTION 076100 - SHEET METAL ROOFING for attachment of sheet metal roofing to joists and its contribution, if any, to lateral stability of joists.
- SECTION 078100 - APPLIED FIREPROOFING for bond strength of sprayed fire-resistive materials with joist primers and coatings and for the optional use of metal lath or nonmetallic fabric mesh.
- Division 09 painting Sections for field-applied painting.
- SECTION 099600 - HIGH-PERFORMANCE COATINGS for field-applied coatings.
* * * * *