Copyright 2003 by The American Institute of Architects (AIA)
Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA

SECTION 05210 - STEEL JOISTS

Coordinate the following requirements specified in other Sections of this Project's Specifications with this Section. Expand this list for office and consultant coordination. Copy and mark this list to distribute to appropriate design team members for Project Manual coordination.

References on this Specification Coordination Checklist are to MASTERSPEC Section numbers and titles existing at the time this Section was updated. Refer to the current Consolidated Table of Contents because Section numbers and titles may have changed.

    SECTION 03300 - CAST-IN-PLACE CONCRETE for installing bearing plates in concrete.
    SECTION 04810 - UNIT MASONRY ASSEMBLIES for installing bearing plates in unit masonry.
    SECTION 05120 - STRUCTURAL STEEL for joist support framing.
    SECTION 05310 - STEEL DECK for requirements for fastening decks to joists.
    SECTION 05500 - METAL FABRICATIONS for furnishing steel bearing plates and miscellaneous steel framing used with joists.
    SECTION 06100 - ROUGH CARPENTRY for requirements for fastening wood blocking and floor and roof sheathing to steel joists.
    SECTION 06105 - MISCELLANEOUS CARPENTRY for requirements for fastening wood blocking and floor and roof sheathing to joists.
    Division 7 roofing Sections for roof-slope requirements.
    SECTION 07210 - BUILDING INSULATION for insulating end-bearing pockets in concrete and masonry.
    SECTION 07411 - METAL ROOF PANELS for attachment of nonstructural metal roof panels to joists and their contribution, if any, to lateral stability of joists.
    SECTION 07610 - SHEET METAL ROOFING for attachment of sheet metal roofing to joists and its contribution, if any, to lateral stability of joists.
    SECTION 07811 - SPRAYED FIRE-RESISTIVE MATERIALS for bond strength of sprayed fire-resistive materials with joist primers and coatings and for the optional use of metal lath or nonmetallic fabric mesh.
    Division 9 painting Sections for field-applied painting.
    SECTION 09960 - HIGH-PERFORMANCE COATINGS for field-applied coatings.


* * * * *